Brew Method - French Press
Weigh out 38 grams (8-cup: 64g), about 5 level tablespoons, of whole beans. Using a burr grinder, grind the coffee to a coarse consistency.
Rinse your French Press with hot water. This preheats the vessel and helps to keep a steady temperature while brewing. Discard the rinse water and add the freshly ground coffee into the preheated French Press. Place onto your scale and tare to ‘0 grams.’
Now we’re ready to start brewing. Once your water has reached a boil, allow it to cool a few degrees, waiting 90 seconds before brewing. The optimal temperature is 200 degrees.
Set timer to 4:00 minutes. Gently pour 600 grams/22 oz (8-cup: 1000 g/35 oz) of water over the grounds, filling the French Press to just below the bottom of the pouring spout. Make sure the grounds are fully saturated and no dry pockets remain at the bottom. Then, start your timer.
After one minute, you’ll notice that a layer of grounds will form a “crust” on the surface of your brew. This is also known as the "bloom."
Give a gentle stir to evenly immerse these grounds into the rest of the brew. Cover your French Press with the accompanying plunger (or with a small plate, or something similar), to prevent heat from escaping while the coffee brews.
When 4 minutes have passed, insert the plunger screen into the French Press chamber and slowly press down, using gentle pressure. If there is resistance when pressing, your grind may be too fine. Adjust accordingly.
Pour into your favorite drinking vessel and enjoy. If there is still brewed coffee remaining in the press, decant it into another vessel. This stops the brewing process and prevents over-extraction.
Tips and Tricks
- If you want to try a different batch size, use 1 gram of grounds per 18 grams of water.
- Start with at least 8 oz (225 grams) of water MORE THAN what you want to brew. You can use some of this hot water to warm up your French Press and your favorite mug.